The Styropan series of cutting machines of polystyrene allows you to minimize your work time, with quick accurate cuts. Furthermore, with their use it is possible to form the slabs in any thickness, shape or size, in order to meet any style. Easy to handle, they are the ideal tool for the installation of external thermal insulation of walls, inclined roofs and taper bevel in the perimeter thermal insulation.

 


 General Description – Polystyrene cutting machine Procut Premium


Procut Premium To Topcut Premium 3015 is a handy, flexible cutting machine expanded EPS and extruded polystyrene. The slabs to be cut should be clean of glue, adhesives residues or other contaminants. Procut Premium can be applied to cutting slabs of maximum thickness of 200mm with straight and diagonal cuts.

 

 

 procut premium   procut premium

 It comes with its plastic case for secure transport which contains the mounting screwdriver blade and additional resistance for cutting slabs of 110mm maximum thickness.

 

The machine has been made in Geramny with the following                                         technical characteristics. 

 Γερμανικής κατασκευής

   

 


Technical Characteristics 

 

Heating time  10 seconds Procut Premium
 Voltage:  230V-50 Hz
 Power:  max 180 Watt
 Power cord length:  3 metres
 Maximum operating temperature:  500 °C
 Weight:  0,9 kg

 


 You can either use the cutting blade which has a maximum depth of 20cm or the heating wire which has a cutting depth of up to 11 cm.

 

 


Cutting types
 

 

 

 


    Straight cuts

 

 κόφτης πολυστερίνης -τύποι κοπής

 

1) Place the polystyrene plate in a stable and safe place.
2) Put the blade towards the material in order to cut it.
3) Press the start button and keep it pressed (see next picture).
4) After 15 to 20 seconds begin to cut with moderate but steady pressure.

CAUTION* Don't touch the blade with your hands You can touch it only after 3 minutes when is has been cooled because there is risk of serious burns.

 

** It is forbidden to have continuously pressed the start button for more than 60 seconds.

 

 


 Diagonal cuts
 

 

 κόφτης πολυστερίνης-τύποι κοπής

1) Place the polystyrene plate in a stable and safe place.
2) Adjust the arm in the desired angle (0-90 o).
3) Put the blade towards the material in order to cut it.
4) Press the start button and keep it pressed (see next picture).
5) After 15 to 20 seconds begin to cut with moderate but steady pressure.

 

 


 

 

Procut operation scheme:

Procut Premium διάγραμμα 

 

 



Note:

 
It is important to read the following safety use instructions carefully and completely.

 

 -The operator of the unit should be trained and be familiar with the device . During the operation of the unit, the use of the appropriate personal protective equipment should be made and all necessary measures required when performing a hot work should be taken.

-The unit can be operated only with the original cables supplied with the purchase. The use of other cables can lead to destruction of the adapter or at increased risk of fire or other damage.

-There should be no flammable materials near the workplace because of risk of ignition from sparks.

-The plug must be used with the socket.

-Avoid contact of the machine with grounded surfaces such as pipes, radiators, stoves, refrigerators, because there is danger of electric shock.

-The operation to rain or other moisture conditions is not allowed.

-When the machine is uded outdoors the use of an extension cord is required.

-Always wear protective glasses and gloves during use.

-Make sure that the start button is set to OFF position before start using the machine.Do not connect the machine to the voltage if the start button is (by mistake0 set to ON position.

-Keep the machine's equipment away from children or people who do not know how to use it. The use of the machine by people without experience can be dangerous.

-Make sure that there are no deficiencies / defects in the equipment of the machine that might affect its operation.

-Keep the cutting wire clean. Regular maintenance and cleaning will allow you to work more accurately and safely.

-In case of power failure, turn off the machine and remove the power plug.

-CAUTION! Do not touch the wire or the blade with your hands!


After use disconnect the machine from the voltage!