ProCut Premium

Procut Premium is a reliable and flexible solution for quick cutting of expanded and extruded polystyrene. The boards to be cut must free of glue, adhesive residues and other contaminants. Procut Premium can be used to cut boards as thick as 200 mm with straight and diagonal cuts.

 

Portable polystyrene cutting machine-procut premium-advantages

 

 

Its technical specifications:

 

Heating time 10 seconds
Voltage 230V- 50 Hz
Power max 180 Watt Portable polystyrene cutting machine-Procut Premium
Power cord length
 3 meters
Maximum operating temperature
 500°C
Weight 0,9 kg

 

Heating time 10 seconds
Voltage 230V- 50 Hz
Power max 180 Watt
Power cord length
 3 meters
Maximum operating temperature
 500°C
Weight 0,9 kg
Portable polystyrene cutting machine-Procut Premium

 

Get more info

 

Procut Premium possible cutting types:

 

STRAIGHT CUTS
STRAIGHT CUTS

 

Procut premium straight cuts-insulation panel cut
  1. Place the polystyrene board on a stable and safe place.
  2. Put the blade towards the material in order to cut it.
  3. Press the start button and keep it pressed (see next picture).
  4. After 15 – 20 seconds, begin to cut with moderate but steady pressure.

 

 

DIAGONAL CUTS
DIAGONAL CUTS

 

Procut premium diagonal cuts -insulation panel cut
  1. Place the polystyrene board on a stable and safe place
  2. Adjust the arm at the desired angle (0-90 degrees).
  3. Put the blade towards the material in order to cut it.
  4. Press the start button and keep it pressed (see next picture).
  5. After 15 – 20 seconds begin to cut with moderate but steady pressure.

 

ATTENTION
*Do not touch the blade with bare hands before 3 minutes have passed and it has cooled, risk of serious burns.
** Do not keep the start button pressed for more than 60 seconds.

 

Its operation scheme is the following:
  Polystyrene cutting machine operating scheme-Procut premium

 

 

It is important to read the following safe use instructions carefully and to their entirety.
  Read the instructions by clicking here: