TopCut Premium

Topcut Premium 3017 is a handy, flexible cutting machine of expanded EPS and extruded polystyrene (XPS).
The boards to be cut should be clean of glue, adhesives residues or other contaminants. Their configuration according to their manufacturing requirements is quick and easy, whether they are destined for simple cuts or for more complicated cuts, such as for shaping an L shoulder on the boards or other fittings with angled cuts. The arm - ruler (ruler) can be set at an angle in the range 0o – 45o (vertical) while the handle on which the wire is stretched (bow) can also be shifted (horizontally) at an angle in the range 0o – 55o.
The device operates with a low voltage adapter (32V) connected to a power supply 220V. The adapter is wired XLR with handle (bow). The wire is heated by pressing the button located in the center of the handle.

 

Polystyrene cutting machine Topcut premium-advantages

 

 

Its technical specifications:

 

Cutting length 1340 mm
Cutting depth 330 mm
Adjustable height 0-270 mm Polystyrene cutting machine Topcut premium
Weight 13,2 kg
Angled cuts
0-10%
Thermal
safety transformer
220V-240V/ 50-60 Hz- 32V

 

Cutting length 1340 mm
Cutting Depth 330 mm
Adjustable height 0-270 mm
Weight 13,2 kg
Angled cuts
0-10%
Thermal
safety transformer
220V-240V/ 50-60 Hz- 32V
Polystyrene cutting machine Topcut premium

 

 

 

Topcut Premium possible cutting types:

 

STRAIGHT CUTS
STRAIGHT CUTS

 

Topcut premium straight cuts -insulation panel cut
  1. Adjust the angle of the handle and of both sides at 0 degrees.
  2. Mark the desired cut line on the polystyrene board.
  3. Lift the handle and place the polystyrene board on the base.
  4. Use the auxiliary arm to place the material on the cutting point.
  5. Press the button and keep it pressed.
  6. Push the handle towards the material to cut it.
  7. Release the button and the heated wire will cool after a few seconds.

 

CUTTING IN STAGES
CUTTING IN STAGES

 

Topcut cutting in stages-insulation panel cut
  1. Adjust the angle of the handle and of both sides at 0 degrees.
  2. Mark the desired cut line on the polystyrene board.
  3. Lift the handle and place the polystyrene board on the base.
  4. Press the button and keep it pressed (the wire is heated).
  5. Push the handle towards the material to cut it.
  6. When you reach the desired stage depth, move the material to the left until the cutting process is completed.
  7. Release the button and the heated wire will cool after a few seconds.

 

ANGLE CUTS
ANGLE CUTS

 

Topcut premium angle cuts -insulation panel cut
  1. Adjust the desired angle of the handle at both sides.
  2. Lift the handle and place the polystyrene board on the base.
  3. Press the button and keep it pressed.
  4. Push the handle towards the material in order to cut it.
  5. Release the button and the heated wire will cool after a few seconds.

 

BEVEL CUTS
BEVEL CUTS

 

Topcut premium bevel cuts-insulation panel cut
  1. Adjust the angle of the handle and of both sides at 0 degrees.
  2. Mark the desired cut line on the polystyrene board.
  3. Lift the handle and place the polystyrene board on the base.
  4. Press the button and keep it pressed (the wire is heated).
  5. Push the handle towards the material in order to cut it.
  6. When you reach the desired stage depth, move the material to the right.
  7. After you reach the desired bevel width, lift the handle.
  8. Release the button and the heated wire will cool after a few seconds.

 

DIAGONAL CUTS
DIAGONAL CUTS

 

 Τopcut premium diagonal cuts -insulation panel cut
  1. Adjust the angle of the handle and of both sides at 0 degrees.
  2. Adjust the desired angle according to the reference angle.
  3. Lift the handle and place the polystyrene board on the base
  4. Place the material on the ruler.
  5. Press the button and keep it pressed.
  6. Press the handle towards the material in order to cut it.
  7. Release the button and the heated wire will cool after a few seconds.

 

HORIZONTAL CUTS
HORIZONTAL CUTS

 

Topcut premium horizontal cuts -insulation panel cut
  1. Adjust the angle of the handle and of both sides at 0 degrees.
  2. Adjust the desired cutting depth.
  3. Adjust the angle of the handle at 0 degrees.
  4. Lift the handle and place the polystyrene board on the base.
  5. Press the button and keep it pressed.
  6. Press the handle towards the material in order to cut it.
  7. Release the button and the heated wire will cool after a few seconds.

 

COMBINED CUTTING TYPES
COMBINED CUTTING TYPES

 

Topcut premium- cutting in stages with angles -insulation panel cuts Topcut premium cutting with slant, with angles -insulation panel cut Topcut premium cutting with double angles -insulation panel cut
Cutting in stages with angles Cutting with slant, with angles Cutting with double angles

 

Cutting in stages with angles
Cutting with slant with angles
Cutting with double angles

 

 

Its operation scheme is the following:
  Polystyrene cutting machine operation scheme -Topcut premium

 

 

 

It is important to read the following safe use instructions carefully and to their entirety.
  Read the instructions by clicking here: