![]() |
Aluboy 3017 is a handy and versatile expanded and extruded polystyrene cutting machine using hot wire technology. It consists of an aluminum base on which the polystyrene boards to be cut are placed, a cutting bow that bears the wire and is capable of torsion angles ranging from 0o-55o and a transformer. The wire is heated by pressing the Start button located on the handle. |

![]() |
Its technical specifications: |
Cutting length |
1040 mm | ![]() |
Cutting depth | 220 mm | ![]() |
Weight |
8,5 kg | |
Thermal safety transformer |
220-240V/ 50-60 Hz-32V |
Cutting length |
1040 mm |
Cutting depth |
220 mm |
Weight | 8,5 kg |
Thermal safety transformer |
220-240V/ 50-60 Hz-32V |
![]() |
|
![]() |
![]() |
Its operating scheme is the following: |
![]() |
The machine is accompanied by a special butt strap mounted behind the aluminum base and bears special connectors for securing Aluboy 3017 on the scaffoldings. Its light weight and its size are its major advantages, which means that there is great flexibility during its transportation on the scaffoldings, saving valuable time for the application workmen. The cuts are now made easily at any point in height while any supplements and special pieces are formed in situ and on the scaffolding. |
![]() |
![]() |
The ability to turn the handle-arc up to 55o makes the side sections and the creation of beveled edge easy, quick while, at the same time, when the heated wire is used, the cuts are clean and extremely accurate. On both sides of the machine we loosen the bolts until we give the desired cutting angle and then we lock the position by rotating them again, this time in a counterbalancing way. |
Optionally, the machine comes with an additional fastening base so you can place Aluboy 3017 with even greater flexibility and stability. |
![]() |
The machine is accompanied by a special butt strap mounted behind the aluminum base and bears special connectors for securing Aluboy 3017 on the scaffoldings. Its light weight and its size are its major advantages, which means that there is great flexibility during its transportation on the scaffoldings, saving valuable time for the application workmen. The cuts are now made easily at any point in height while any supplements and special pieces are formed in situ and on the scaffolding. |
![]() |
The ability to turn the handle-arc up to 55o makes the side sections and the creation of beveled edge easy, quick while, at the same time, when the heated wire is used, the cuts are clean and extremely accurate. On both sides of the machine we loosen the bolts until we give the desired cutting angle and then we lock the position by rotating them again, this time in a counterbalancing way. |
![]() |
Optionally, the machine comes with an additional fastening base so you can place Aluboy 3017 with even greater flexibility and stability. |
![]() |
![]() |
Aluboy 3017 possible cutting types: |
![]() |
![]() |
![]() |
Straight cuts | Angle cuts | Diagonal cuts |
![]() |
Cutting with slant, with angles |
![]() |
Straight cuts |
![]() |
Angle cuts |
![]() |
Diagonal cuts |
![]() |
Cutting with slant, with angles |
![]() |
It is important to read the following safe use instructions carefully and to their entirety. | ||||||||||||||||
Read the instructions by clicking here: ![]() |