Verix Profiline

Το Verix Profiline 3017 is an expanded and extruded polystyrene cutting machine,manufactured in Germany, perfectly designed for use in construction sites for professionals.
Its use is based on a system of a heated wire, with an advantage over conventional cuts when using a saw or a blade, since this way the cuts are extremely precise and clean, while, furthermore, there are no statically charged polystyrene granules. With Verix Profiline larger volumes of polystyrene can also be cut and even the most complex cuts are now possible.

 

Mηχάνημα κοπής-κόφτης πολυστερίνης (φελιζόλ) Verix Profiline-τα πλεονεκτήματα του

 

 

Its technical specifications:

 

Cutting length 1340 mm Transformer 220-230V / 50-60 Hz /42V / 200 VA / IP54
Cutting depth 430 mm Angled cuts Integrated, 0-10%
Adjustable height
 0-210 mm

Mηχάνημα κοπής-κόφτης πολυστερίνης (φελιζόλ) Verix Profiline

 Base Aluminum
Telescopic handle Expandable from 430 mm to 530 mm Weight 20 kg
Support arm Integrated support arm with socket on scaffolding    

 

 

Cutting length 1340 mm
Cutting depth 430 mm
Adjustable height 0-210 mm
Telescopic handle Expandable from 430mm to 530 mm
Support arm Integrated support arm socket on scaffolding
Transformer 220-230V / 50-60 Hz /42V / 200 VA / IP54
Angled cuts Integrated, 0-10%
Base Aluminum
Βάρος 20 kg
Mηχάνημα κοπής-κόφτης πολυστερίνης (φελιζόλ) Verix Profiline

Get more info

 

 

Verix profiline possible cutting types:

 

STRAIGHT CUTS
STRAIGHT CUTS

 

Topcut premium straight cuts -insulation panel cut
  1. Adjust the angle of the handle and of both sides at 0 degrees.
  2. Mark the desired cut line on the polystyrene board.
  3. Lift the handle and place the polystyrene board on the base.
  4. Use the auxiliary arm to place the material on the cutting point.
  5. Press the button and keep it pressed.
  6. Push the handle towards the material to cut it.
  7. Release the button and the heated wire will cool after a few seconds.

 

CUTTING IN STAGES
CUTTING IN STAGES

 

Topcut cutting in stages-insulation panel cut
  1. Adjust the angle of the handle and of both sides at 0 degrees.
  2. Mark the desired cut line on the polystyrene board.
  3. Lift the handle and place the polystyrene board on the base.
  4. Press the button and keep it pressed (the wire is heated).
  5. Push the handle towards the material to cut it.
  6. When you reach the desired stage depth, move the material to the left until the cutting process is completed.
  7. Release the button and the heated wire will cool after a few seconds.

 

ANGLE CUTS
ANGLE CUTS

 

Topcut premium angle cuts -insulation panel cut
  1. Adjust the desired angle of the handle at both sides.
  2. Lift the handle and place the polystyrene board on the base.
  3. Press the button and keep it pressed.
  4. Push the handle towards the material in order to cut it.
  5. Release the button and the heated wire will cool after a few seconds.

 

BEVEL CUTS
BEVEL CUTS

 

Topcut premium bevel cuts-insulation panel cut
  1. Adjust the angle of the handle and of both sides at 0 degrees.
  2. Mark the desired cut line on the polystyrene board.
  3. Lift the handle and place the polystyrene board on the base.
  4. Press the button and keep it pressed (the wire is heated).
  5. Push the handle towards the material in order to cut it.
  6. When you reach the desired stage depth, move the material to the right.
  7. After you reach the desired bevel width, lift the handle.
  8. Release the button and the heated wire will cool after a few seconds.

 

DIAGONAL CUTS
DIAGONAL CUTS

 

Τopcut premium diagonal cuts -insulation panel cut
  1. Adjust the angle of the handle and of both sides at 0 degrees.
  2. Adjust the desired angle according to the reference angle.
  3. Lift the handle and place the polystyrene board on the base
  4. Place the material on the ruler.
  5. Press the button and keep it pressed.
  6. Press the handle towards the material in order to cut it.
  7. Release the button and the heated wire will cool after a few seconds.

 

HORIZONTAL CUTS
HORIZONTAL CUTS

 

Topcut premium horizontal cuts -insulation panel cut
  1. Adjust the angle of the handle and of both sides at 0 degrees.
  2. Adjust the desired cutting depth.
  3. Adjust the angle of the handle at 0 degrees.
  4. Lift the handle and place the polystyrene board on the base.
  5. Press the button and keep it pressed.
  6. Press the handle towards the material in order to cut it.
  7. Release the button and the heated wire will cool after a few seconds.

 

COMBINED CUTTING TYPES
COMBINED CUTTING TYPES

 

Topcut premium- cutting in stages with angles -insulation panel cuts Topcut premium cutting with slant, with angles -insulation panel cut Topcut premium cutting with double angles -insulation panel cut
Cutting in stages with angles Cutting with slant, with angles Cutting with double angles

 

Cutting in stages with angles
Cutting with slant with angles
Cutting with double angles

 

 

With the use of Verix Profiline 3017 the capabilities are endless. There is the possibility of turning the arc from 0o-45o while the arm can also be rotated from 0o-90o. Additionally, there is a special provision of lateral cuts 0- 10% as well as a telescopic arc handle with extension from 430mm σε 530mm.
There is a foldable leg for stabilizing the machine as well as a special provision for fixing on the scaffoldings. In addition, the cutting system includes a transformer that can be connected to a foot switch for greater convenience and speed of work. Its curved base offers additional stability. The telescopic handle allows the arm expansion from 430 mm to 530 mm. By loosening the clamping lever, the arm is extended up to 530 mm, allowing the boards to be placed horizontally and vertically, making cuts that were otherwise impossible, to be carried out rapidly and simply. Its operation scheme is the following:
 

Mηχάνημα κοπής-κόφτης πολυστερίνης (φελιζόλ) Verix Profiline

 

 

It is important to read the following safe use instructions carefully and to their entirety.
  Read the instructions by clicking here: